AGGREGATES TREATMENT EQUIPMENT
Secondary Bucket wheels
suction dredgers application
TSS Series bucket wheels are suitable for the treatment of sand coming from suction dredgers, so having dimensions suitable to operate in presence of high sand and slurry flow rates. installed downstream of a rotating washing screens, the TSS receive the sand and slurries from suction dredger.
The ease of use and the reduced maintenance required, make it the ideal machines to manage the flow from dredgers.
Main construction specifications
- Main tank
steelwork made and equipped with a strong support base and a rapid drainage pipe located on the bottom. For transport purposes, the settling tank is divided into three sections, bolted together, normally assembled on site.
- 2 separate wheels
the two bucket wheels are completely indipendent eachother and moved by two separate motor sets. Ad the large dimension of wheels, they are separate in sections and assembled on field.
each wheel supports 24 buckets, bolted on, interchangeable, made in stainless steel with elliptical discharge openings.
- Discharge overflow lips
where the waste waters exit the system, are designed for a long envelope so that the water speed at discharge is lovered below teh turbidity speed, helping the lamination of flow and increasing the sedimentation of fines.
- Motor block
made by two separate groups, each containing a motor and an hydraulic joint, pulleys, vee belts and planetary gearbox (oil lubricated).
|Maximum Slurry flow||[ l/1' ]||12000|
|Maximum Sand capacity||[ t/h ]||350|
|Maximum feed gradation||[ mm ]||30|
|Bucket wheel diameter||[ mm ]||5000|
|Buckets width||[ mm ]||1500|
|Number of buckets||24 + 24|
|Inastalled Power||[ kW ]||11 + 11|
|Approx weight (empty)||[ kg ]||16500|
- Optional Urethane Buckets
- Load hoppers engineered on customer's needs
- Load hoppers engineered on customer's needs.